Measuring an Outdoor Campaign with QR Codes and UTMs: The Tracking Build for Auto Hoods and No-Parking Boards (2026)
Six QR codes, six coupon codes and one UTM convention for a three-locality Neighbourhood Launch. What each signal can prove, what a roaming auto hood cannot, and why the fixed board is the easier medium to attribute.
Saurabh Nishad
Founder, The Mediaverse and Mediaverse Digital · Mediaverse Digital · prices published, no fluff
Give each outdoor format and locality its own QR code, UTM-tagged link and coupon, tag WhatsApp enquiries by source, baseline branded search 4 weeks before launch, and compare geo-ads in outdoor and control localities. A board on a fixed gate attributes to its locality; a roaming auto hood attributes to its format, and to a locality only directionally.
Key takeaways
- Our digital plus outdoor page builds five signals in before launch: QR codes per format and locality, UTM links and short URLs, coupon codes per locality, WhatsApp enquiries tagged by source and a branded search baseline taken 4 weeks before launch. Control localities on the digital side are the sixth.
- A three-locality Neighbourhood Launch with auto hoods and no-parking boards needs six QR codes, six short links and six coupon codes: two formats times three localities.
- No-parking boards sit on fixed house and society gates, so a scan or coupon from a board code belongs to that locality. Autos move, so an auto hood code proves the format and only suggests the locality.
- On published rates the media in this build is 300 auto hoods at Rs.650 (Rs.1,95,000) and 1,000 boards at Rs.45 (Rs.45,000), the 300-hood and 1,000-board minimums. Fewer hoods or boards cannot be booked.
- The measurement stack is covered by the flat 10 percent media-management fee, with no separate analytics charge, per the page's FAQ. A campaign landing page is listed from City Launch at Rs.2,50,000; on a Neighbourhood Launch the links land on WhatsApp or an existing page.
- Nothing in the build measures someone who saw a hood, remembered the name and searched later without a code. That is what the search baseline and control localities are for, and the report labels those numbers directional.
Outdoor advertising gets called unmeasurable mostly because campaigns are not built to be measured. Our digital plus outdoor service fixes that before launch rather than after, and the page names the five signals it builds in. This post is the build itself, worked for one Neighbourhood Launch: three Bangalore localities, auto hoods and no-parking boards, four weeks. The prices behind it are in our worked launch cost guide, so this post stays on the tracking: how many codes, how to name the links, what each signal can prove, and the one limit that no QR code removes. The signals, tiers and fee were read from the live service page on 6 November 2026; the code counts, naming convention and examples are ours. We publish no scan rates or response benchmarks, because the page publishes none.
What can each tracking signal prove in an outdoor campaign?
| Signal | What it records | What it can prove | What it cannot |
|---|---|---|---|
| QR code per format and locality | A scan of one specific code | That a person stood in front of that format and acted | Anyone who saw it and did not scan |
| UTM link and short URL | A website session tagged with source, medium and content | Which code or typed link brought the visit | Visits from people who typed the brand name instead |
| Coupon code per locality | A redemption at the counter, on the site or over WhatsApp | That the offer from that placement turned into a purchase | Purchases made without quoting the code |
| WhatsApp enquiry tagged by source | The opening message carries the code or format | Which format started the conversation, with the locality attached | Enquiries typed into a fresh chat with no prefilled text |
| Branded search baseline | Demand for the brand name over the 4 weeks before launch | Whether name searches rose during the flight | Which format caused the rise |
| Outdoor versus control localities | Digital results where outdoor ran against matched localities without it | Whether ads did better where the street was branded | An exact figure; the page says it is not a laboratory |
Read down the last column and the pattern is plain: the first four signals are exact but partial, because they only count people who used a code, and the last two cover everyone but only directionally. A report that adds them together as one number overstates what is known. The page's own FAQ promises to state plainly where attribution is directional rather than exact, and that is the line we would hold any outdoor report to, ours included.
How many QR codes and coupon codes does a Neighbourhood Launch need?
One per format per locality. Our worked build uses HSR Layout, Koramangala and BTM Layout as the three localities, inside the 2 to 4 the Neighbourhood Launch covers, with two formats: auto hood branding and no-parking boards in Bangalore. The media is the smallest bookable order of each on the one-time card: 300 hoods at Rs.650 per auto and 1,000 boards at Rs.45 per board. The hoods are one 300-auto order planned as three batches of 100, because the 300 minimum applies to the order, and 200 or 250 hoods cannot be booked at any price.
| Placement | QR code and short link | Coupon code | Media at card rate |
|---|---|---|---|
| Auto hoods, HSR Layout batch (100) | hood-hsr | HOODHSR | Rs.65,000 |
| Auto hoods, Koramangala batch (100) | hood-kor | HOODKOR | Rs.65,000 |
| Auto hoods, BTM Layout batch (100) | hood-btm | HOODBTM | Rs.65,000 |
| No-parking boards, HSR Layout (about 333) | board-hsr | GATEHSR | About Rs.15,000 |
| No-parking boards, Koramangala (about 333) | board-kor | GATEKOR | About Rs.15,000 |
| No-parking boards, BTM Layout (about 334) | board-btm | GATEBTM | About Rs.15,000 |
| Total | 6 codes | 6 coupons | Rs.2,40,000 before GST |
Six codes is the floor for this mix, not a target. Adding a third format or a fourth locality multiplies the sheet: three formats across four localities is twelve codes and twelve coupons. Coupons should be short enough to say aloud at a counter and unique enough that one placement's code is never guessed from another's, which is why the format word leads and the locality follows.
How should UTM links be named for auto hoods and boards?
Every short link redirects to a URL carrying the five standard campaign parameters that Google Analytics reads from campaign URLs. The convention matters more than the tool: if the hood links say auto and the board links say outdoor-board in one flight and np-board in the next, the report cannot add them up. We fix the names on the scope before anything is printed.
| Parameter | Auto hoods | No-parking boards | Geo-targeted Meta and Google ads |
|---|---|---|---|
| utm_source | auto-hood | np-board | meta or google |
| utm_medium | outdoor | outdoor | paid-social or cpc |
| utm_campaign | launch name and month, e.g. hsr-launch-nov26 | same | same |
| utm_content | locality: hsr, kor or btm | locality: hsr, kor or btm | locality of the geo-targeted ad set |
| utm_term | not used | not used | keyword, Google search only |
The shared utm_campaign is what lets the street and the screen sit in one report: filter on the campaign and every session from every surface appears, then split by source to see format and by content to see locality. The same tagging discipline is what our lead-tracking guide for websites and Google Business Profile applies to listing links, and it costs nothing to set up.
Why is an auto hood harder to attribute to a locality than a board?
Because the medium moves. A no-parking board is fixed to a house or society gate, so a scan of board-kor came from someone standing at a gate in Koramangala, and a GATEKOR coupon at the counter belongs to that locality. An auto hood batch is planned around a locality, but the autos carry passengers wherever the fares go. A scan of hood-hsr proves the person saw an auto from the HSR batch; it does not prove they were in HSR Layout when they scanned.
- Report hood results by format first and by batch second, and label the batch split as directional.
- Use the board codes for the locality question: if Koramangala boards outperform HSR boards, that is a locality finding the hoods cannot give.
- Put the coupon on the hood as well as the QR code, because a person in a moving auto's wake is more likely to remember a short word than to scan; we publish no scan-rate figure for either surface.
- Use the route photos and installation logs the outdoor teams supply to confirm the batches ran where planned before reading anything into the batch split.
The gap no code closes
Someone who sees the hood on Monday, remembers the name and searches for it on Friday leaves no QR scan, no coupon and no tagged link. That person is real and is usually the larger group. The branded search baseline and the control-locality comparison are the only parts of the build that see them, and both read as a lift, not a count.
What does the Neighbourhood Launch tier include for measurement?
Measurement is covered by the fee, not priced on top. The page's FAQ says the flat 10 percent media-management fee covers the measurement stack of QR codes, UTMs, coupons, WhatsApp tagging and the search baseline, with no separate reporting or analytics charge. What changes by tier is where the links land and how often you see the numbers. A WhatsApp capture flow is on every tier, which matters most on the smallest one, because the Neighbourhood Launch has no campaign landing page.
| Neighbourhood Launch | City Launch | Multi-City | |
|---|---|---|---|
| Retainer | From Rs.1,00,000 | From Rs.2,50,000 | From Rs.6,00,000 |
| Scope | 1 city, 2 to 4 localities, 4 weeks | 1 city, every format, 6 to 8 weeks | 3+ cities, 8 to 12 weeks |
| Where QR and UTM links land | WhatsApp capture flow or an existing page | Campaign landing page | Campaign landing page per the scope |
| Reporting | 1 end-of-campaign report | Weekly dashboard | Weekly dashboard per city |
| Measurement listed on the tier card | WhatsApp capture flow | QR, UTM and coupon measurement | City-level measurement |
Two honest consequences follow. On a Neighbourhood Launch there is one report at the end, so the weekly reallocation by locality described on the page is a City Launch habit; at four weeks the end report is mainly a guide to the next flight. And because the tier card lists only the WhatsApp flow, the scope document should name each of the six signals and the code sheet explicitly, so nothing is assumed. On this build the media is Rs.2,40,000 for the outdoor plus whatever the digital line is, and the 10 percent fee is charged on that combined media.
When does each part of the tracking build happen?
| When | Tracking task | Why then |
|---|---|---|
| 4 weeks before launch | Start the branded search baseline | The page baselines 4 weeks out, so the lift has a before |
| Scope stage | Fix the code sheet, coupon list and UTM convention in writing | Names cannot change once printed |
| Before print | Generate the QR codes and short links, test every scan to the right destination | A wrong redirect on 300 hoods cannot be fixed with a click |
| Launch day | Outdoor up and geo-ads live in outdoor and control localities | Both halves start together, as the page describes |
| During the flight | Log scans, sessions, coupons and tagged WhatsApp enquiries by code | Exact counts by format and placement |
| Campaign end | Report exact signals and directional lift separately | So the two kinds of number are never added |
For the street side of the plan, the rates and minimums used here are on our auto branding page and the city pages, and the full cost of this mix with GST is worked in the launch cost guide linked above. The tracking build is the part that turns that spend into a cost per enquiry by format, and it has to exist before the first hood is printed.
Frequently asked questions
Can you track how many people saw an auto rickshaw ad?
Not directly. A QR code, coupon or tagged link only counts the people who acted on it. Our digital plus outdoor build adds a branded search baseline taken 4 weeks before launch and a comparison of geo-targeted ads in outdoor localities against control localities, which show whether interest rose where the autos ran. Those are directional lifts, and the report labels them that way rather than as a viewer count.
Should each locality get its own QR code?
Yes, each format in each locality. A three-locality build with auto hoods and no-parking boards needs six codes and six matching coupons. Boards are fixed to gates, so their codes answer the locality question exactly. Hood codes are assigned by batch, but autos roam, so hood results are read by format first and by locality only directionally.
Is QR and UTM tracking charged separately on a digital plus outdoor campaign?
No. Our service page's FAQ says the flat 10 percent media-management fee on combined outdoor and digital media covers the measurement stack, including QR codes, UTMs, coupons, WhatsApp tagging and the search baseline, with no separate reporting or analytics charge. The retainer starts at Rs.1,00,000 for a Neighbourhood Launch, plus media, plus that fee, GST extra.
Where should a QR code on an auto hood send people?
To a page or chat that already knows where the scan came from. On a City Launch that is the campaign landing page with the UTM tags attached. On a Neighbourhood Launch, which has no campaign landing page, it is usually the WhatsApp capture flow with a prefilled message carrying the code, or an existing page of your site with the same UTM tags.
What is the smallest outdoor order this tracking build works with?
The smallest bookable orders on the published card: 300 auto hoods at Rs.650 one-time, or 500 auto back panels at Rs.170, or 1,000 no-parking boards at Rs.45. Orders below those minimums cannot be booked. The build itself scales down to one format in two localities, which is two codes and two coupons, but a smaller media order is not available.
Sources
- Mediaverse Digital digital plus outdoor campaigns (the five measurement signals and control localities, the 4-week search baseline, tier features, the Rs.1,00,000, Rs.2,50,000 and Rs.6,00,000 retainers and the 10 percent fee covering the measurement stack)
- The Mediaverse auto branding (one-time hood rate of Rs.650 for 300 to 499 autos, Rs.630 from 500, 300-auto minimum)
- The Mediaverse no-parking board advertising in Bangalore (Rs.45 per board from a 1,000-board minimum, Rs.35 from 5,000)
- Google Analytics Help: collect campaign data with custom URLs (the utm_source, utm_medium, utm_campaign, utm_content and utm_term parameters)
- Mediaverse Digital WhatsApp marketing (opt-in capture on ads and QR codes)
This guide supports our service
Digital plus outdoor campaigns
Keep reading
cost guide
Website Design Cost in India (2026): Real Agency Prices
Freelancer, agency, or DIY builder? Real 2026 price bands for business websites in India, the seven factors that move the quote, and what a fair fixed-scope proposal must include.
comparison
Do I Need a Website If I Have Google Maps? (2026)
A Google Business Profile is rented space that ranks for where you are, not what you sell. A clear comparison of the two, the cases where a listing alone is genuinely enough, and what to fix first.
playbook
How to Get Your Business Cited by ChatGPT and Google AI Overviews in India (2026)
No one can force an AI mention, but the probability can be engineered. The playbook we run on themediaverse.in: answer-first structure, published numbers, schema, consistent entity data, and what it honestly costs.
